Ultra-Ramp ramp extensions extenders review
You might want to read my other article first about ramp extenders in general. This article will specifically review the Ultra-Ramps Extensions Kit product.
These ramps worked really well. However, obey the following safety rules when using these extenders:
1) You must install the extension into the proper holes on the ramp, so that the plastic part is flat against the ground. Otherwise, you will break the extension (it is not designed to carry the weight of the vehicle by itself).
2) The top part must be installed properly into the designated mounting groove in the bottom (right) part.
3) You must use a ramp with the reinforcement in the center (the small legs in the picture) for the larger and heavier cars such as minivans. I have seen ramps of this type without the center reinforcement.
4) Always apply the parking brake and place wheel stops under the rear wheels to prevent the car from moving.
5) The yellow ramps must be placed flat on the ground, and at the same distance from each of the wheels. They must not lean to the side as the car rides up the ramps.
6) The car must be driven all the way up the ramp and over the small bump to prevent the car from easily driving off the ramps on its own.
7) There ramp extenders are only designed to work with ramps manufactured after the production date code of 93 (printed on the bottom side of your ramps).
˅˅˅ Additional valuable information is available at one of the links below: ˅˅˅
Did you like the article? Let Google Search know by clicking this button:
Page last modified 29-Apr-12 08:51:42 EDT
Previous page: PCI-E USB 3.0 card
Next page: Agilent InfiniiVision DSO5034A review