Tenma Soldering Station replacement tips

The Tenma brand temperature controlled soldering stations are very affordable, even to the hobbyist. It, however, comes with a needle sharp tip, which is only usable for SMD work.

Tenma tips used to be hard to find, but some supplies are coming up with replacement tips.

I recommend to get a bigger "chisel" style tip for medium duty work, and big "conical" tip for heavy heating, and a rounded mini tip instead of the included needle sharp one.

And note: to replace the tip, you remove the tip plus the ceramic core attachment. Do not try to separate the tip from the ceramic piece. Consult pictures below:

This "core" comes out with the tip:

 

Original sharp tip is on the right, the medium chisel replacement is on the left:

 

Regarding suppliers, there are:

http://www.mpja.com/prodinfo.asp?number=15852+TL

http://www.mcmelectronics.com/product/21-7983

other styles are available on both websites.



˅˅˅ Additional valuable information is available at one of the links below: ˅˅˅

Page last modified 21-May-16 15:47:40 EDT
Comments on this page:


Add a comment to this page
Comment Title:
Your Name:
Your Email Address:
Notify me of new comments to this item:
Additional Comments:
This is a captcha-picture. It is used to prevent mass-access by robots. (see: www.captcha.net)